China Nmrv/Nrv Nmrv040 Worm Gear Speed Reduction Reducer Gearbox cone drive worm gearbox

Merchandise Description

NMRV  REDUCTION WORM GEARBOX
The NMRV 040 worm gear motor is characterized by a wide variety of equipment ratios (5 – 80), a compact aluminum alloy housing, and ease of set up and servicing. The device is equipped with an engine electrical power of .09 – 0.fifty five kW. Output shaft rotation frequency: 900 – 2800 rpm.
The NMRV 040 motor gearbox has comparable mounting dimensions with the Siti MU40, STM UMI 40, Varvel SRT forty drives and can be utilized to replace them.
Areas components:
Case – aluminum, flanges – aluminum, worm – steel, worm wheel crown – bronze. 
Type of lubricant: synthetic ISO VG 320. 
Weight: 2.3 kg.

Variety designation plan

NMRV – 040 – 80 – 17.5 – 0.twelve – B3

  • NMRV – worm gear motor
  • 040 – size (centre distance, mm)
  • 80 – gear ratio
  • seventeen.5 – output shaft rotation velocity, rpm
  • ,twelve – electric motor energy, kW
  • B3 – mounting situation

NMRV 040 gearbox functionality

I
 
one = 2800 rpm 1 = 1400 rpm 1 = 900, rpm
two ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
five 560 24 one.fifty 87 280 36 1.10 86 180 41 .eighty 84
seven.5 373 29 one.30 88 187 forty one .ninety three 86 120 forty nine .seventy three 84
10 280 32 one.10  86 a hundred and forty  44 .seventy six eighty four ninety 50 .58 82
fifteen 187 34  0.78  84 ninety three  44  0.53  81 60 52  0.41 79
20 a hundred and forty 31  0.fifty six  82 70  40  0.37  79 forty five 47  0.29 76
twenty five 112 34  0.fifty  79 56  43  0.34  74 36 49  0.26 71
30 93 33  0.forty four  73 forty seven  38  0.27  68 30 43  0.21 sixty five
forty 70 35  0.36  72 35  44  0.24  67 23 52  0.19 sixty four
50 fifty six 32  0.29  65 28  41  0.20  60 eighteen forty eight  0.sixteen fifty seven
60 47 29  0.24  59 23  38  0.seventeen  54 15 41  0.thirteen fifty
eighty 35 23  0.15  56 18  31  0.eleven  51 11 37  0.09 forty nine
100 28 24  0.thirteen  53 fourteen  29  0.09  48 nine 33  0.07 44
  • n1 – rotational speed el. engine
  • n2 – revolutions on the output shaft
  • T 2M – torque on the output shaft
  • P is the maximum allowable engine electrical power
  • RD – performance

GEARBOX Function

one.Very good good quality,extended lifestyle time,lower noise.
 
3.Large effectiveness,large torque.

 

General and mounting proportions NMRV 040

NMRV040 gear motor  has a wide selection of equipment ratios.
Gear ratios:  five, 7.5, ten, fifteen, twenty, twenty five, thirty, forty, fifty, 60, 80, 100 .

Output flange to NMRV 040 gearbox

Geared NMRV040 can be equipped with unilateral or bilateral output shaft. 
The gearbox comes normal with a hollow output shaft

A torque arm is an further alternative to the gearbox.

  Model  NMRV Collection
  Single Stage  RV25-RV150
  Ratio  7.5-one hundred
  Input Electrical power  0.06KW-15KW
  Output Speed  14-280rpm
  Output Torque   5-1800Nm
Main parts  worm wheel,worm shaft
 Core parts material      worm shaft:twenty Cr Mn Ti,worm wheel:Nodular solid iron interal,9-4 copper external
  Lubrication   RV30-90:artificial oil, RV110-a hundred and fifty:GN460-W mineral oil
 Bearings  C&U

 
 
 

US $32
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Industry
Hardness: Hardened
Installation: Any Angle
Gear Shape: Worm Gear
Step: Single-Step
Type: Worm and Wormwheel

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

I
 
1 = 2800 rpm 1 = 1400 rpm 1 = 900, rpm
2 ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
5 560 24 1.50 87 280 36 1.10 86 180 41 0.80 84
7.5 373 29 1.30 88 187 41 0.93 86 120 49 0.73 84
10 280 32 1.10  86 140  44 0.76 84 90 50 0.58 82
15 187 34  0.78  84 93  44  0.53  81 60 52  0.41 79
20 140 31  0.56  82 70  40  0.37  79 45 47  0.29 76
25 112 34  0.50  79 56  43  0.34  74 36 49  0.26 71
30 93 33  0.44  73 47  38  0.27  68 30 43  0.21 65
40 70 35  0.36  72 35  44  0.24  67 23 52  0.19 64
50 56 32  0.29  65 28  41  0.20  60 18 48  0.16 57
60 47 29  0.24  59 23  38  0.17  54 15 41  0.13 50
80 35 23  0.15  56 18  31  0.11  51 11 37  0.09 49
100 28 24  0.13  53 14  29  0.09  48 9 33  0.07 44

###

1.Good quality,long life time,low noise.
 
3.High efficiency,big torque.

###

  Model  NMRV SERIES
  Single Stage  RV25-RV150
  Ratio  7.5-100
  Input Power  0.06KW-15KW
  Output Speed  14-280rpm
  Output Torque   5-1800Nm
Core parts  worm wheel,worm shaft
 Core parts material      worm shaft:20 Cr Mn Ti,worm wheel:Nodular cast iron interal,9-4 copper external
  Lubrication   RV30-90:synthetic oil, RV110-150:GN460-W mineral oil
 Bearings  C&U

###

 
 
 
US $32
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Motor, Motorcycle, Machinery, Agricultural Machinery, Industry
Hardness: Hardened
Installation: Any Angle
Gear Shape: Worm Gear
Step: Single-Step
Type: Worm and Wormwheel

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

I
 
1 = 2800 rpm 1 = 1400 rpm 1 = 900, rpm
2 ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
2 ,
rpm
2M ,
N * m
P
kw
RD
%
5 560 24 1.50 87 280 36 1.10 86 180 41 0.80 84
7.5 373 29 1.30 88 187 41 0.93 86 120 49 0.73 84
10 280 32 1.10  86 140  44 0.76 84 90 50 0.58 82
15 187 34  0.78  84 93  44  0.53  81 60 52  0.41 79
20 140 31  0.56  82 70  40  0.37  79 45 47  0.29 76
25 112 34  0.50  79 56  43  0.34  74 36 49  0.26 71
30 93 33  0.44  73 47  38  0.27  68 30 43  0.21 65
40 70 35  0.36  72 35  44  0.24  67 23 52  0.19 64
50 56 32  0.29  65 28  41  0.20  60 18 48  0.16 57
60 47 29  0.24  59 23  38  0.17  54 15 41  0.13 50
80 35 23  0.15  56 18  31  0.11  51 11 37  0.09 49
100 28 24  0.13  53 14  29  0.09  48 9 33  0.07 44

###

1.Good quality,long life time,low noise.
 
3.High efficiency,big torque.

###

  Model  NMRV SERIES
  Single Stage  RV25-RV150
  Ratio  7.5-100
  Input Power  0.06KW-15KW
  Output Speed  14-280rpm
  Output Torque   5-1800Nm
Core parts  worm wheel,worm shaft
 Core parts material      worm shaft:20 Cr Mn Ti,worm wheel:Nodular cast iron interal,9-4 copper external
  Lubrication   RV30-90:synthetic oil, RV110-150:GN460-W mineral oil
 Bearings  C&U

###

 
 
 

Is a worm gear reducer right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer is right for your application, you’ve come to the right place. This gear reducer is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm_reducer

This is a reducer

Worm reducer is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducers require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducers produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducers, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducers are an excellent choice for applications requiring high torque and low speeds. These reducers are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducers are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducers are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducers are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducers have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm_reducer

It is high efficiency

When a worm reducer is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer is typically much hotter than a hypoid reducer, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducers are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducers have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer can produce the same amount of output as a 1/2 HP hypoid reducer. A Nissei Corporation study compared the two types of reducers, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer.
The efficiency of a worm gear reducer depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer also have an impact on its efficiency. As a result, worm gear reducers should be used with the right type of lubricant.
In a worm gear reducer, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer is also quiet and has a low friction coefficient.

It has a low clearance

Worm Reducers are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm_reducer

It has a high torque to weight ratio

The worm gear reducer is a versatile gear train that provides a high torque-to-weight ratio. These reducers are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducers are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducers, worm gear reducers are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducers are one of the most popular types of reducers. It provides high torque and high speed ratio in a compact package. These reducers are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducers come in a variety of shapes and sizes, including parallel shaft reducers and planetary worm reducers. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Nmrv/Nrv Nmrv040 Worm Gear Speed Reduction Reducer Gearbox     cone drive worm gearboxChina Nmrv/Nrv Nmrv040 Worm Gear Speed Reduction Reducer Gearbox     cone drive worm gearbox
editor by czh 2022-11-28

gearboxworm

As one of leading gearboxworm manufacturers, suppliers and exporters of mechanical products, We offer gearboxworm and many other products.

Please contact us for details.

Manufacturer supplier exporter of gearboxworm

Recent Posts